FAG 3220-M-L61 Angular Contact Ball Bearings

Grease Speed Rating n1:2200 rpm; D:180.0000 mm; Basic Static Radial Load Rating Co:176000 N; Basic Dynamic Radial Load Rating C:195000 N; Oil Speed Rating n2:3200 rpm; B:73.00 mm; Accessories:No Shield, no Seal,; d:85.000 mm; Sealed Speed Rating n3:2200 rpm; Fillet Radius ra:2.50 mm;

Basic Dynamic Radial Load Rating C:26500 N; Grease Speed Rating n1:7500 rpm; Basic Static Radial Load Rating Co:8500 N; Oil Speed Rating n2:9000 rpm; d:35.000 mm; B:21.00 mm; Fillet Radius ra:1.50 mm; D:80.0000 mm;

C1 max.:43 mm; dk:92 mm; h:235 mm; d2 max.:162 mm; G:M 56x4; l1 min.:125 mm; Basic dynamic load rating C:880 kN; Mass rod end:7.9 kg; Specific dynamic load factor K:300 N/mm²; d:70 mm;

Basic Dynamic Radial Load Rating C:65000 N; Fillet Radius ra:1.50 mm; Basic Static Radial Load Rating Co:67000 N; Grease Speed Rating Open/Shielded n1:3400 rpm; B:24.00 mm; D:180.0000 mm; Sealed Speed Rating n3:2100 rpm; d:130.000 mm; Accessories:Two Seals; Oil Speed Rating Open/Shielded n2:4000 rpm

r, r1,2 min.:0.3 mm; B:12.5 mm; Mass inner ring:0.023 kg; F:35 mm; d:30 mm;

Grease Speed Rating n1:3600 rpm; Basic Static Radial Load Rating Co:156000 N; Fillet Radius rb:1.00 mm; D:140.0000 mm; d:55.000 mm; Oil Speed Rating n2:4600 rpm; Fillet Radius ra:2.00 mm; Basic Dynamic Radial Load Rating C:178000 N; B:66.00 mm;

B:240 mm; K:12 mm; Da max.:728 mm; Mass bearing:427 kg; Calculation factor Y0:2.2; b:22.3 mm; r1,2 min.:7.5 mm; Calculation factor e:0.3; d:460 mm; Calculation factor Y1:2.3;

B:21 mm; r1s (min):1.1 mm; D:80 mm; Dynamic (Ca):66.8 kN; d2:35 mm; b1:9.5 mm; E:mm; s:1.4 mm; d2 (max):51.2 mm; Pu:7.550 kN;

d1:1000 mm; A:12 mm; d:1060 mm; G3:15 mm; B:100 mm; Hydraulic nut:HMV 212E; d3:1200 mm; Mass adapter sleeve assembly:508 kg; Lock nut:HM 30/1060; B5:125 mm;

Height T:54.2 mm; Shaft Diameter D:40 mm; Basic Dynamic Radial Load Rating C:30700 N; Dimension A1:38.9 mm; Dimension A2:14.3 mm; Insert Bearing IB:ZMaRC; Height H:171.5 mm; Diameter N:14.3 mm; Weight W:1.70 kg; Dimension L:101.6 mm;

Hydraulic nut:HMVC 52E; G:258.877 mm; B:35.966 mm; Mass adapter sleeve assembly:17 kg; Locking plate:PL 52; B5:44.704 mm; Lock nut:N 052; d:240 mm; Sleeve:S 152x9; d1:228.6 mm;

P150°:3100 kN; Ca:246 mm; J1:260 mm; Taconite seal:2 x TK 30/500; bc:243.5 mm; J6:1120 mm; P0°:8000 kN; N:60 mm; db:470 mm; H2:135 mm;

Hydraulic nut:HMV 38 E; d:190 mm; Locking device:MB 38; G:M 190x3; Lock nut:KM 38; Mass adapter sleeve assembly:11.5 kg; B:28 mm; B4:30.5 mm; B1:169 mm; d1:171.45 mm;

H1:57.15 mm; H:112.713 mm; Adapter sleeve assembly:SNW 9x1.1/2; End plug (suffix Y):EPR 3; Bearing:22209 EK; h:24.606 mm; R1:28.575 mm; Cap bolt:2 x 7/16-14 UNC; da:38.1 mm; Mass pillow block:5.47 kg;

B:36 mm; rs (min):2.5 mm; D:150 mm; Static (Coa):290.2 kN; C:30 mm; Pu:33.510 kN; a:34 mm; Dynamic (Ca):212.4 kN; d2:85 mm; r1s (min):2 mm;